 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| ADAM-5202 ADAM-5240 ADAM-5030 NEW NEW 2-port AMONet Master Module 4-axis Stepping/Pulse-type Servo Motor Control Module 2-slot SD Storage Module NEW ADAM-5202 RoHS 2002/95/EC COMPLIANT ADAM-5240 RoHS 2002/95/EC COMPLIANT ADAM-5030 RoHS 2002/95/EC COMPLIANT Specifications General Certifications Power Consumption Connectors LED Indictors Number of Rings Transmission Speed CE 0.5 W (Max.) RJ-45 Active, Error (Each Port) 2 2.5, 5, 10 or 20 Mbps with automatic data flow control Half duplex RS-485 with transformer isolation CAT5 UTP/STP Ethernet cable 10 kV Max. 100 m (20 Mbps/32 slave modules) or 50 m (20 Mbps/64 slave modules) Distance 2 Rings with Max. 128 (1 Ring with 64 slaves) Module Number 0 ~ 50 C (32 ~ 122 F) Specifications General Certifications Power Consumption Connectors Operating Temperature Relative Humidity CE 1.1 W (Max.) 100-pin SCSI-II female 0 ~ 60 C (32 ~ 140 F) 5 ~ 95 % RH non-condensing (refer to IEC 68-2-3) 4 Axis DC +12 ~ 24 Vdc 2/3-axis Linear Interpolation/2axis Circular Interpolation 2, 147, 483, 646 for each axis 1PPS ~ 4MPPS 1PPS ~ 2MPPS 1PPS ~ 4MPPS Pulse /Direction (1-pulse, 1- direction type) Up/Down (2-pulse type) T/S-curve Acceleration/ Deceleration Specifications General Certification CE Power Consumption 0.5 W (Max) Storage Type SD (Secure Digital Card) Storage Number 2 USB Type USB Rev 2.0 (Compliant) USB Number 2 0 ~ 55 C (32 ~ 131 F) Operating Temperature Max Storage 1 GB x 2 Format FAT-16 Interface PCI Bus Note: only for ADAM-5550 Series Number of Axis External Power input Range Speed Speed Motion Serial Interface Cable Type Surge Protection Communication Continuous Interpolation Drive Output Pulses Range Pulse Output Type Speed Curve Ordering Information ADAM-5030 2-slot SD Storage Module Communication Slave Operating Temperature Note: only for ADAM-5550 Series Encoder Pulse Input Type Quadrature (A/B phase or Up/Down) Counts per Encoder Cycle X1, X2 ,X4 (A/B phase only) Protection 1,000 Vdc isolation Input Range 5 V ~ 30 V Input Pulse for Encoder Interface External Signals Driving Input Signal Max Input Frequency Protection Input Signal Max Input Frequency Protection Input Signal Ordering Information ADAM-5202 2-ring AMONet Master Module nEXOP + and nEXOP 100 Hz 1,000 Vdc Photo coupler isolation nIN1 ~ 3 4 kHz 1,000 Vdc Photo coupler isolation nALArm (servo alarm) nINPOS (position command completed) nOUT4 ~ 7 External Deceleration/Instantaneous Stop Signal Input Pulse for Servo Motor Drives General Purpose Output Signal Ouput Signal Input Signal Protection Note: only for ADAM-5550 Series Emergency Stop EMG - one emergency stop input for ADAM-5240 1000 Vdc Photo coupler isolation and RC filtering Ordering Information ADAM-5240 4-axis Stepping/Pulse Servo Motor Control Module PC-based Controllers & I/O Modules |
Price & Availability of ADAM-5030
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |